Forum Jump
Hi there!
I am experiencing pretty high CPU loads in VEPro even when idle, around 40%.
I am running a fairly large template but it is on a Dell R820 with 4x Intel Xeon E5-4650 2,7Ghz 8 cores (32 cores 64 threads) it's running on 4 SSD drives, so it should be capable of quite a bit I'd assume.
When under "load" the CPU's dont even touch 10% of usage in task manager, while VEPro is maxing out and popping & clicking.
The audio interface I am using is an audient ID22 (which has some horrendous drivers.)
Sample rate - 44.1KHz
Buffer is 1024 samples but having it on 512 or 2048 doesn't really chance anything.
Any ideas? Thanks in advance.
|
|
|
|
Hi Phyrexmusic,
I answered this question a while back here: https://www.vsl.co.at/community/posts/t50804-Struggling-with-VEPRO-dropouts#post280093
Be aware that you are responsible for changes that you do in your BIOS. So be a little cautious :)
Best, Ben
Ben Vienna Symphonic Library
|
|
|
|
Hello Ben,
Thank you so much for the response!
Would this also work for Windows Server 2016 as far as you know? And in your example kontakt cpu is on 3% but in my case kontakt seems to have up to 100% cpu load. (while again task manager says something around 5%)
Cheers,
|
|
|
|
No experiences with tuning Windows Server here.
Ben Vienna Symphonic Library
|
|
|
|
You cannot post new threads in this forum.
You cannot reply to threads in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.