Vienna Symphonic Library Forum
Forum Statistics

182,209 users have contributed to 42,210 threads and 254,708 posts.

In the past 24 hours, we have 3 new thread(s), 28 new post(s) and 51 new user(s).

  1. Home
  2. Sample Libraries
  3. Vienna Instruments Libraries
  4. Vienna Ensemble w. Pro Tools & Logic on separate machines

  • Vienna Ensemble w. Pro Tools & Logic on separate machines

    H
    H
    Can I send midi from Logic on one machine, to a VE slave on a second machine, and have that VE slave output audio to PT HD on a third computer? (All over ethernet.) Thanks, Hakan
  • M
    M
    I'm also interested in this. As far as I know, Ensemble 3 supports full audioLAN capability over simple Gigabit-Ethernet. Using Ensemble v2 I imagine the following scenario: sequencer-software is running on a dedicated host-machine, which is then connected via midi and audio-I/O to a separate PC running Ensemble 2.0. Should be possible, shouldn't it? Thanks!
  • cmC
    VSL Team
    cmC

    welcome hakan,

    what can be done:

    a) MIDI from machine_1 to machine_2 (either over a physical cable or MIDI-over-LAN), running VE2 on machine_2, sending audio eg. via ADAT or MADI to machine_3

    b) into your audio host on machine_1 as master insert VE3 (network) and select machine_2 as slave, but audio goes back to machine_1 over the gigabit ethernet then - you could now route audio from machine_1 to machine_2 again using ADAT or MADI

     

    you cannot route audio output from VE3 (via ethernet) on machine_2 to machine_3 if VE3 has been inserted on machine_1

    christian

    and remember: only a CRAY can run an endless loop in just three seconds.