Vienna Symphonic Library Forum
Forum Statistics

180,804 users have contributed to 42,141 threads and 254,364 posts.

In the past 24 hours, we have 1 new thread(s), 7 new post(s) and 73 new user(s).

  • Cubase 6..0.5 + VEP Pro 5 - crash on loading a new project

    Hi,

    I don't often post on support forums, but lately it was a little bit frustrating.

    So, here is where I'm standing:

    When I'm loading a new project in Cubase x86 with 3 instances in VEP Pro 5 Server x64 containing

    - Instance 1 - Kontakt 5 x64

    - Instance 2 - PLAY x64

    - Instance 3 - VI Pro Brass template

    it fails to load on 2nd instance and the progress bar of sample loading just stuck at 10 samples. The only way to reset it is to close VEP Pro application via Task Manager of Windows 7 x64.

    While I'm in task manager I can see one core at almost 100%.

    Also, when I touch the progress window of VEP Pro the Loading rings begins to turn again, but nothing else happens.

    My only workaround that I found is to load Cubase with the project without loading VEP Pro and when it's fully loaded without connections, I open via instruments rack instance by instance and manually connect it via localhost (new) feature which is a life saver in my case.

    So, my question is: do I do smth in a wrong way? It has never happenned to me with VEP Pro 4. With the 5, I have hangs quite often and sometimes need even to do a hard reset because VEP Pro won't allow Windows to shutdown. My windows installation is completely clean by the way as I needed to reinstall everything after some nasty experience with Adaptec RAID card which is now out of my system.

    Thanks in advance for your insights. My sys specs are in my signature, but I can provide you with everything you need.

    Best,

    sH


  • I'm having similar issues. My Cubase project is linked to VEP instances on 3 slaves. If the Vienna Server is running on the slaves, then the cubase project will never open. WIth the Vienna Servers not running, Cubase loads the project, and then I can start the Vienna Servers, load the metaframes and manually reconnect each instance.


  • 2 things: one, Play x64 has been reported as featuring a slow loading problem in the past in VEP(4). However there was admittedly a bug that appeared in some sytems which has been addressed by VSL. was Play loading fine before?

    2: I never liked coupling the p;rojects. I don't know of any particular advantage to working that way and it is ture that the loading time is seriously faster decoupled, loading VEP first, fully, and then launching the Cubase project which will automatically connect properly.


  • I'm still having this problem, even with the VEP instances decoupled. There are a couple Play instruments, but the majority is Kontakt.


  • Guys,

    Thank for the input! I want to clarify smth:

    1. To civilization 3: I've heard about some trouble waters with Play x64, but I never actually experienced it. Slow loading time, well, everything run from SSDs here, but the lack of background loading in Play unlike Kontakt and VSL, definitely make you feel that time. For me, I feel it's ok! I don't mind waiting 1 time. The trouble is that when Cubase automatically invoke all the loading of Play in VEP Pro, then it's just stuck on 10 samples or so and don't go any further. If I create an instance manually, Play loads just find and everything works as it should.

    2. What about usefullness of the automatic loading, well I cannot agree it is useless. It is definitely the perfect companion. Imagine ptbbos loading 3 slaves manually all the time, let's talk loading times there! [:)]

    Thx

    ptbbos: can I ask what kind of computers do you use for slaves? I think I will need to expand my station even if loading everything on 1 computer is pretty convinient, 24gb becomes short with those mamooth libraries nowadays.


  • Everytime I get a new PC, the old one just joins in as a slave. So the main PC is currently an i7 2600, with 3 slaves (i7 920, Q6600 and E8600). All running Windows 7 64-bit, with 8-24GB of RAM, and libraries spread over multiple SATA drives.


  • in my experience, which isn't trivial, decoupled loads quite a bit faster per se. if there is a personal preference in not loading loading three times rather than loading faster, I of course have no quarrelt with that. they would have to be pretty far apart for that to make up for the difference in loading time I would think. Maybe I have larger project, don't know. I have found that Cubase projects are less stable coupled with VEP as well.

    I'm only offering my experience. I don't have these problems.


  • Agreed 100% - decoupled loads significantly faster. My issue, is that if the VEP servers are load, Cubase will not load the project (with decoupled VEP). I have to load Cubase first, then load the VEP servers, and then manually reconnect all the decoupled VEP instances. With version 4, I was able to load the servers, load the Cubase project, and everything linked up automatically.


  • Guys,

    There's no quarell at all about loading coupled or decoupled. I have my template, but I like to vary things and the way I work so to vary the end result and the choice of instruments. Thanks for the input, really.

    The problem remains the same: right now, at least for me, it doesn't work as it is supposed to. I'm just like ptbbos: can't load the project with the VEP server on.


  • Similar problem here;

    If I load a previously saved project at some point in the load up an instance of Play will freeze ('preparing to load 0%) and the only route out is to use task manager to close Cubase - then load the project in Cubase with no VEP Servers running, then load the Metaframes, then re-connect.

    I guess although maybe it is true that loading VEP and Cubase separately is quicker - it does mean I have to set up 3 separate slaves (finding and loading the right metaframes), which I'm sure uses up any loading time advantage - plus, as I say above - the one click load option allows me to get on with something else while Cubase chugs away.

    Hopefully some miraculous update will get released which returns things to the old behaviour (without anyone having to admit it was their previous update that broke the workflow in the first place [;)] )

    Cheers,

    D.


  • well, since you report a loading problem, you have to be realistic and deal with that frame, don't you. I don't think you can blame the behavior of a version unless all things were equal. it's true that coupled projects (where cubase is the agent) load *very* slowly, and if there is a problem cubase will hang, as it's liable to do with a plugin. you might reasonably look at the Play version, which has been reported to load quite slowly.

    "to set up 3 separate slaves (finding and loading the right metaframes), which I'm sure uses up any loading time advantage"
    I wouldn't be so sure about it. Have you any experience? I do with both workflows. I would assert with real confidence that it does not unless you have very small projects. the loading time is seriously faster if cubase is not involved. there is no maybe. I'm pragmatic, so I decouple the projects. It just works more smoothly. you can be stubborn but it does work more smoothly, that's a fact of life.


  • last edited
    last edited

    @ptbbos said:

    Agreed 100% - decoupled loads significantly faster. My issue, is that if the VEP servers are load, Cubase will not load the project (with decoupled VEP). I have to load Cubase first, then load the VEP servers, and then manually reconnect all the decoupled VEP instances. With version 4, I was able to load the servers, load the Cubase project, and everything linked up automatically.

    I suspect corruption in the project. At least that was my experience, I've had projects that I had to deal with that way. That is not normal behavior, it's unusual. I am guessing it can't be reproduced unless someone happened to have a corrupt project. If it's that way with every project is another story but  I do not experience it with Cubase and any build of VE Pro except in cases of projects I ended up reconfiguring.


  • I noticed one thing though about VEP 5, that is troubling. I have forgotten to decouple certain instances and saved the Cubase project with a coupled instance; although I decoupled and saved, if I have to reconnect to that instance it will reload according to the last Cubase save as though coupled. this I believe is new to VEP5. If so, BAD IDEA.

    Now VEP 5 is heavier software than 4, it might load a bit slower per se. But I haven't noticed it decoupled. In the sitch I just described I don't notice slow loading at all, in fact very fast but it's not a heavy frame.