Vienna Symphonic Library Forum
Forum Statistics

180,734 users have contributed to 42,140 threads and 254,357 posts.

In the past 24 hours, we have 4 new thread(s), 14 new post(s) and 56 new user(s).

  • Slave computer fails to load instance.

     Hi: New User with Digital Performer on WINDOWS.

     I have a windows 7 Master PC and a new slave windows 7 PC. All VEP software is current.I noticed that after I close a project In DP and reopen it Vienna ensemble Pro fails to completely reconnect to the slave computer.

     What specifically happens is when I open my project. VEP on the slave box shows a connection statues BUT does not load any of the instruments.

     On the Master side the instrument shows up as disconnected. Here is where it gets  weird. When I click "Connect" The slave computer shows another instance connected to the master computer but the master still fails to connect to the slave.

     The workaround is to rebuild the instrument in DP.

     The performance once connected is fine its just when I close out of the project and reopen it fails to reload.

     I created the instruments in DP as specified in the VEP docs. I am using aux tracks for additional instruments to mix individually.

      Has anyone ever seen this?? I am assuming its a operator error. I tried saving mataframes and projects In vep and reloading them manually but nothing seems to work.

     Any ideas??


  • Hello Mike, 

    I assume that you are working with dynamic IP addresses. 

    You should definitely use static IP addresses, and avoid 169.x.x.x addresses (these are automatically assigned by your computer and tend to change).

    Please try the following: 

    Manually assign one of these IP addresses to the computers in your setup: 192.168.0.x or 10.0.0.x, and assign a subnet mask of 255.255.255.0, then the connection should work. 

    VE PRO connects based on 2 informations: IP address and instance name.

    Best,

    Paul 


    Paul Kopf Product Manager VSL
  • Thank you Paul:  

    These are all Static IP  I can ping each box. the firewalls are off. I am going to do more testing and se if it follows the project or this particular instance. Never had a issue with cubase


  • FYI:

    This exact behavoir is now in cubase on a project I just finished last week that was working. I uninstalled VEP and reinstalled latest version and tested on a new cubase project. I still have the same issue. I am going to put a ticket with tech support.


  • I have run into the similar issue in DP and Cubase. Its been happening for at least 8 months now.

    When I load a template that has a Decoupled VEPro, it connects fine to the slave computer. BUT if I have to disconnect the instance for any reason, I get the issue as mike harper described above.

    When I press the connect button on the VEPro plugin and connect to the SLAVE instance, the SLAVE computer shows a connection, but the plugin in DP or Cubase does not show anything connected and still has the connect button active.

    I am using static ip's for all my computers.