Vienna Symphonic Library Forum
Forum Statistics

180,752 users have contributed to 42,140 threads and 254,362 posts.

In the past 24 hours, we have 3 new thread(s), 16 new post(s) and 48 new user(s).

  • Solo Strings & Sibelius: Double Stops on Violin not playing

    last edited
    last edited

    Double stops are not playing properly on violin for me. The upper note plays fine, but the lower note seems to play briefly then cuts out. This is only for Violin. VIola & Cello are fine.

    I'm not quite sure what I'm doing to cause this. I could be mistaken but it seems like it started after I imported the VSL House Style.

    FWIW I'm on SIbelius 8.4.2, Mac Yosemite 10.10.5, VE 5,4,14074 (64 bit).

    Sample file attched

    double_stops.sib.zip-1696285960519-5yaot.zip

  • What patch are you using?

    DG


  • DG -

    If by "patch" you mean the build# of Sibelius, then I'm at 8.4.2 build 231.  

    If you're referring to the Patches tab in the VSL view, then all it says is

    - A - String Patches

    01 Violin Solo

    02 Viola SOlo

    03 Cello SOlo

    04 Bass Solo

    If that's not what you were asking, then could you be more specific?   Thanks!   Eric


  • Hello Eric!

    Our performance interval patches like legato are monophonic by design. So if you have a slur at a double stop, you will only hear one note. You have the following options.

    - Exclude the slur from playback with the Sibelius inspector by unchecking "Play on pass 1". This way legato will not be triggered and you will be able to hear both notes.

    - Try our Vienna Instruments Pro player. It offers a polyphonic legato mode.
    http://www.vsl.co.at/en/Vienna_Software_Package/Vienna_Instruments_PRO

    Best regards,
    Andi


    Vienna Symphonic Library
  • Andi -

    I'm not following your suggestion.  If you look at my example - there are no slurs.  Regardless, I tried a small example of adding a slur in front and not triggering the slur on first pass, but no luck - it still only sounded the top note.

    Regarding your other suggestion - so it seems like I have to shell out an additional 145 to get polyphonic legato.   I have Solo Strings 1 & 2.   Will Instruments Pro simply work out of the box with my setup or are there any additional installation and/or configuration steps to get the pieces talking to one another?   E.g., will I have to re-install solo strings and/or do additional tweaks in Sibelius?

    Eric


  • Hello Eric!

    If the double stops from your example don't work, there's probably a mistake somewhere in your setup. Without having your playback configuration, I can't find the problem though. Please check the Troubleshooting section of the "Optimizing Sibelius Playback" manual.
    http://www.vsl.co.at/en/MyDownloads/Notation_Related

    For using Vienna Instruments Pro with Sibelius, there are no additional tweaks or installations necessary. It's a different sample player though. So if you want to use it for older projects, you will have to change the playback configurations of those projects and replace Vienna Instruments with Vienna Instruments Pro.

    Best regards,
    Andi


    Vienna Symphonic Library
  • Andi - Apologies for yet more ignorant questions.  

    1) I'm going to try out the VI Pro - but when I go to the basket it says I need a Vienna Key.  Does my existing key work or do I need to purchase a new key - even though I'm just trying the demo version.

    2) Are there any limitations of the demo version (besides the obvious expiraiton after 30 days)

    Thanks, Eric


  • Hi Eric!

    Your latest questions are easy to answer.
    1) You don't need another Vienna Key.
    2) No limitations.

    Best,
    Andi


    Vienna Symphonic Library
  • Andi - I have now spent about 3 hours struggling with Vienna Pro and am unable to things fully functional.   Let me start with a very basic question.  After I downloaded, unzipped, and installed VI Pro, I ws expecting to see something like the first attachment

     

    Instead I am seeing the second

     

    Have I done something wrong?

    Image

    Image


  • Hello Eric!

    Everything looks correct on your screenshot. Vienna Instruments Pro is a different software than Vienna Ensemble Pro which you have highlighted in your first screenshot. In order to use Vienna Instruments Pro with Sibelius, activate Vienna Ensemble and add Vienna Instruments Pro inside Vienna Ensemble.

    Best,
    Andi


    Vienna Symphonic Library
  • Andi -  I had done that, but no luck.   I'm doing string quartets.  The best I can do is to get one instrument (e.g. Violin) playing for all 4 instruments - i.e., when I click on the cello a violin sound comes out.  But let's see if we can figure out what I'm doing wrong.   So here are a whole bunch of screen shots.

    1. VE "basic" Instrument configuration
    2. VE "basic" Mixer
    3. VE Pro Instrument configuration
    4. VE Pro Mixer
    5. Sibelius playback Device for VE "basic"
    6. Sibelius playback Sound Sets for VE "basic"
    7. Sibelius playback Device for VE Pro
    8. SIbelius playback Sound Sets for VE Pro

    As far as I can tell I have configured VE Pro identically to basic, but I cannot get Sibelius to talk to VE Pro.   As far as I can tell, there is nothing wrong with my VE Pro configuration.  When I click on the key indies VE Pro I hear sounds.

    After much experimenting and consulting the documentation- plus some luck I clicked on the "Show" button while inside the SIbelius Sound Set window - and lo and behold a whole new VE Pro window opened up - according to the doc this is the "Pro Basic View"   When I tried loading one of the Sound Sets, I finally heard sound.   However, it appears that I can only load one instrument at a time in this view.   So I guess I could creatge 4 playback devices in Sibelius, one for each instrument - but that strikes me as a very clumsy solution.  

    What am I doing wrong here?

    9. Pro Basic View"

    10.  "Pro Basic Vie" with instrumant loaded

    11.  Everything "Pro"

    Image

    Image

    Image

    Image

    Image


  • Afdter I typed everything in, it looks like I cannot attach more files, so here is the next bacth

    Image

    Image

    Image

    Image

    Image


  • And the last "everything" screen shot.

     

    Oh, and one thing I noticed?  In th=is last "everything" shot?  If I click on the lower right VE Pro window, it hides the upper right wiondow & the Sibelius mixer.

    The upper window - the one which actually creates the sounds - can only be opened up from within Sibelius.

    Image


  • Apologies for barrage of messages - but it looks like even though the "Attach files" window isa telling me that I attached 5 files, only 3 are visible.   If you need any of the missing files that I listed in ,y description, plz let me know and I'll re-send them.


  • Hi Eric!

    I couldn't find any mistakes in your screenshots. So your playback configuration seems to be ok. Further possible reasons for your problems can be found in the "Troubleshooting" chapter of the "Optimizing Sibelius Playback" manual.

    Best,
    Andi


    Vienna Symphonic Library
  • Andi -

    I solved this, but no help to the manual.   The solution was to use the Vienna Ensemble device in Sibelius - *NOT* the Vienna Instruments Pro device. 

    I have to vent some of my frustration here.  It is extraordinarily hard to figure out how things work by looking ast these manuals; and I am a computer professional by trade and am used to dealing with obscure and/or poorly written manuals and instruction sets.  Once you understand how all the different pieces work together it starts to make sense, but for a novice outsider, there is no "road map" to understanding how things work.

    Eric

    Image


  • Hello Eric!

    Thanks for your feedback. I'm glad it's working now. Only now I have seen that in one of your screenshots you have activated Vienna Instruments Pro instead of Vienna Ensemble. Two screenshots earlier you have activated Vienna Ensemble. That's why I probably missed it in the other one. By the way, I have mentioned earlier in this thread that Vienna Ensemble needs to be activated and Vienna Instruments Pro needs to be added inside. In the "Optimizing Sibelius Playback" manual, it's written on page 3 that Vienna Ensemble needs to be activated. So please don't blame it on the manual. ;-) In case you have not seen it yet, we offer a tutorial video on how to set up our instruments in Sibelius as well.
    http://www.vsl.co.at/en/Products/Software#!Video_Demos

    Best,
    Andi


    Vienna Symphonic Library
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on
  • ErisnoE Erisno moved this topic from Finale on
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on
  • ErisnoE Erisno moved this topic from Dorico on
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on