Vienna Symphonic Library Forum
Forum Statistics

180,828 users have contributed to 42,142 threads and 254,367 posts.

In the past 24 hours, we have 2 new thread(s), 5 new post(s) and 77 new user(s).

  • [SOLVED] Reaper Vienna Mir

    I use Vienna Mir with Reaper and it seems very difficult ! I use a brand new PC with very fast CPU and 64 Go of ram... I consequently can't suspect it is due to some hardware limitations .... I have a lot of crashes when I want to introduce the plug-in or when I want to modify channel parameters. If this process succeeds, ther is no problem in usage... The crashes only appears when I decide to move a source, to modify its width ... or to modify sliders position in the menu. Have you any recommandation to avoid this ...


  • Hi Dupuy,

    sorry to hear you're facing problems. Please tell us more about your system: OS, audio device(s), software- and driver-versions .... if there are specific error messages, they would be good to know, too. And in case you're able to provoke the crash regularly please list the necessary steps. We'll try to help then. :-)

    Kind regards,

    /Dietz 


    /Dietz - Vienna Symphonic Library
  • Windows 10 64

    two audio interfaces usb : dangerous music source or discrete 8 from Antelope (the trouble still exist with two uniits)

    the crash process is the following one, when it happens : i have no messages. I just see that Reaper becomes totally  unusuable. If i move my mouse on the Reaper Gui, the pointer becomes a hourglass... and all the Gui becomes grey. I only have the message on top « reaper doesn’t answer », All others appli (internet, microsoft browser or office...) still work but Reaper never closes. If I use ctrl alt sup, to stop’the mir task, and the reaper task, mir task is stopped but Reaper refuses to stop... i am obliged to restart the computer...

    I hope it is clear for you


  • Do you experience similar problems in other hosts, too?

    /Dietz - Vienna Symphonic Library
  • I sometimes used with cubase pro 10 which was my previous daw for midi compositing and I don’t remember that i had this trouble with this other Daw...  i have no others daws


  • What are the software-versions of MIR Pro and Reaper?


    /Dietz - Vienna Symphonic Library
  • All my software are updated.

    Mir : 5 4 16751

    Reaper 6 28


  • Hi again,

    I just tested with the same combination of software versions (although under Win7 64bit as I burnt the MoBo of my brandnew Win10 machine a week ago 8-/ ...). I'm sorry to say that I can't reproduce the issue: I can move Icons on MIR Pro Venues' stages without any problems here.

    Maybe you can create a very basic Reaper-project that exhibits the issue and send it to support@vsl.co.at, with reference to this thread. We'll look into it then ASAP.

    Kind regards,


    /Dietz - Vienna Symphonic Library
  • BTW: The company that built my Win10-based DAW strongly advises their customers to stay away from USB-connected audio interfaces under this OS for performance reasons ... any chance to try different hardware, even if it's just for testing purposes?


    /Dietz - Vienna Symphonic Library
  • Oh, and I forgot to ask: What are the latency settings you're using for your audio hardware and for MIR Pro (... it's in the Preferences)?


    /Dietz - Vienna Symphonic Library
  • In reaper the latence is about 22/30 ms (it is written at the top of the main view) . For Mir,  The latency is 128. I use a very fast multicore processor and a big Ram... if you think that it is possible to load more the CPU to redue the trouble, it is not a problem... I will follow your advices.

    Image


  • Hi Dupuy,

    for testing purposes, please try the following steps:

    - Set the latency of your audio system, to 512 or 1024 samples.

    - Set the sampling frequency to 44.1 kHz.

    - Create a new Reaper project.

    - Create a single audio track and connect it withe the master output.

    - Instantiate MIR Pro as insert effect.

    - Open MIR Pro's Preferences, set its latency to 1024 samples (... while you're at it, you might also activate "Dynamic Processing", but that's only relevant for bigger projects, not for our testing scenario). Close the Pref's window.

    - Add something like a test-tone generator plug-in before MIR Pro. Pink Noise is a good testing source, but any continuous signal will do.

    - Now, while the signal is processed by MIR Pro, move the Icon on the Venue's stage and try to provoke the error you were describing.

    ... if everything's fine up to now, add more instances and see what happens. Assuming that you're working in Stereo on a recent machine you should be able to have 150 or more instances playing easily.

    A final thought: You didn't tell us about your graphics card yet. A problem in this context could explain the issues when changing MIR's GUI items.


    /Dietz - Vienna Symphonic Library
  • Thank you.. I am ready to do these tests but something is not very fair for me... For about 10 years, all my projects are in 48 kHz... Is it very important to switch to 44,1 ?


  • 48 kHz is fine, of course. I just wanted to make sure that we can rule out issues that might related to higher sampling rates (which I haven't tested with Reaper yet).


    /Dietz - Vienna Symphonic Library
  • I set the parameters as you mentionned... But I have a problem to do the test.

    I describe it :

    - I create only one track in Reaper

    - I insert the wave generator form "waves" (Emo generator) which provides sinus, white or pink noise

    - I insert one instance of Mir pro 24 in the track

    - I start the generator ... That's ok of course but...

    - at each time i put my mouse on the GUI of Mir to move or modify the  source parameters,  the generator stops... It restarts when i click on the Reaper GUI... I have not this problem with others plug-ins (for example, with Vienna suite, that I own too) . With all others I may modify parameters on the plug-in GUI without any consequences on the Reaper's workflow..

    Graphic card : NVDIA Geforce GTX 1050 Ti


  • I can't say anything about the graphics card as I'm no hardware guru. :-) Just make sure that it's drivers are up-to-date; maybe Google knows something about its Ins and Outs.

    If you were in Cubase or Nuendo I would also ask if you have activated the host's Preference for releasing the ASIO-driver once the application is in the background. Is there anything like that in Reaper?

    I've also heard from people who were throttling their system by using certain graphics routines on the CPU rather than the graphics card, but again: I'm no hardware guru.

    ... other than that I can just repeat that I'm able to use MIR Pro in Reaper without any problems here. :-/


    /Dietz - Vienna Symphonic Library
  • PS: I assume that's the relevant Pref in Reaper (see attachment).

    Image


    /Dietz - Vienna Symphonic Library
  • You are not a guru but you are not very far  to become it ! I put your recommandations on Reaper settings and it works fine now ! I hope there is definitve ... I thank you very much !  I'll come back if another trouble decides to bother me !


  • So it was indeed the Preference for releasing the drivers in the background? Yay! :-)

    Enjoy MIR Pro now. 

    Best,


    /Dietz - Vienna Symphonic Library