[SOLVED] Volume Problem With One VEP Instance In Project With Six

[DaddyO]

Can't figure this problem out. Here's the facts:

VE Pro 7 Server Project

6 Instances: VI Winds, VI Brass, VI SE Strings, SY Pianos, VI Perc, VI SE Vocals

Except for SY Pianos all use VI Pro channels and MIR Pro

All set up the same so far as I can tell, all working fine except the VI SE Strings

The VI Strings are getting a proper MIDI signal on each channel, but unlike the other instances the audio signals and volumes are almost nonexistent. If I push the Channel Volume, Master Volume, Vel-XFade, and Expression Sliders to the max I can get very low volumes, but if I set them at 90 (my normal default) you cannot hear a thing. Channels to group bus and group bus to output 1/2 look to be routed properly, the same as the working instances. MIR Pro settings are the same, placement on the Grosser Saal stage are similar to what I've always done with success. Nothing looks amiss in VI Pro, presets and patches fine and active.

I'm at a loss. Any ideas what to investigate next?

[DaddyO]

I've decided on my own that my next step will be to re-create the problem instance and see if it resets something I haven't yet noticed.

[DaddyO]

Problem mostly solved by re-creating the instance. It may also had something to do with VE Pro auto-adding bus channels to venues.