Vienna Symphonic Library Forum
Forum Statistics

182,303 users have contributed to 42,218 threads and 254,754 posts.

In the past 24 hours, we have 2 new thread(s), 17 new post(s) and 40 new user(s).

  1. Home
  2. Software
  3. Vienna MIR & Vienna Suite
  4. How to convert stereo project to 3D??

  • How to convert stereo project to 3D??

    Dewdman42D
    Dewdman42D

    Alright, so I am wanting to take an existing project that was done before obtaining MirPro3D in stereo...to a MirPro3D mix.  However, I can't seem to find a way to easily convert a VePro instance into a surround instance instead of stereo.  I can see a way to start a new instance as 7.1.4, but I already have my saved frame file with 100 channels....it was saved previously as stereo...so I can't seem to find a way to either convert it to a surround version or to load it as a surround version.  Presumably this would need to happen BEFORE loading in there viframe into the instance because as it loads in MirPro3D on each channel it needs to do so letting MirPro3D itself know its dealing with surround at that time...as Dietz has said its bad to start out stereo and later go to surround, but ok to start out surround and later only use stereo...

    Is there a way?

    From the DAW side I can easily convert the LogicPro project from stereo to 7.1.4 surround.  But when I insert VePro plugin on a surround instrument channel and try to connect to VePro with a new instance, it gets setup as stereo also, not surround.

    So anyway, I really can't figure out how to create an actual 3D instance in VePro and MIrPro3D other then creating a brand new VePro instance using the "new Project" icon on the task bar and choosing 7.1.4 format for it.  Is there some other way in order to easily convert an existing stereo project to surround?
  • DietzD
    VSL Team
    DietzD

    Isn't that exactly what the VE Pro-command "File > Convert Project Channel Configuration" is there for?

    Without VE Pro you could save your existing setup as Venue Preset with Roles for each Icon, which can be simply drag'n'dropped (is that a word?) into any new Venue setting with the Output Format of your choice. 

    /Dietz - Vienna Symphonic Library
  • Dewdman42D
    Dewdman42D

    doh..I missed that.  I will try it.  I already spent the last couple hours doing it the hard way by saving some channel sets and then I had to actually change all the MIRPro instances to stereo->7.1.4 and I also ended up having to reload each MIR instrument that I had previously saved for such an occasion...well I think it got it all setup right...it had all my channels...and it had MIRPRO in 7.1.4 mode and the stage looked about right, etc...  But then when I set LogicPro to 7.1.4 surround and put an instance of VePro plugin in there and try to connect, it says the channel configuration doesn't match.

    So still blocked.  Its late here I'm off to bed, but I'll try the conversion option you mentioned from scratch tomorrow.  But I think probably I have to figure out how to properly get a 7.1.4 version of the VePro.AU3 plugin onto a track in LogicPro in order to connect to the VePro server in 7.1.4 mode.
  • Dewdman42D
    Dewdman42D

    So I used the Convert Channel Configuration and it worked as expected.  Easy.   Only thing is it didn't change the panner on the Master Output channel, it kept it as stereo panner.  I just disabled it anyway.

    However, I still can't get the Vepro plugin in LogicPro to connect to that instance of VePro.  Any idea what I might need to do differently?

    I have the LogicPro surround format set to 7.1.4 and that is what the VePro instance is also configured as.

    I create an instrument channel in LogicPro and set its output to SURROUND.  Attempt to insert VePro plugin, it only provides stereo or multi-channel options...does not provide 7.1.4 option.  When the plugin opens it shows "stereo" mode in the status bar of the plugin.  Attempting to connect to the VePro instance results in error dialog about the channel configuration not matching.
  • Rubens TubenchlakR
    Rubens TubenchlakR
    last edited
    last edited

    @Dewdman42 said:

    So I used the Convert Channel Configuration and it worked as expected.  Easy.   Only thing is it didn't change the panner on the Master Output channel, it kept it as stereo panner.  I just disabled it anyway.

    However, I still can't get the Vepro plugin in LogicPro to connect to that instance of VePro.  Any idea what I might need to do differently?

    I have the LogicPro surround format set to 7.1.4 and that is what the VePro instance is also configured as.

    I create an instrument channel in LogicPro and set its output to SURROUND.  Attempt to insert VePro plugin, it only provides stereo or multi-channel options...does not provide 7.1.4 option.  When the plugin opens it shows "stereo" mode in the status bar of the plugin.  Attempting to connect to the VePro instance results in error dialog about the channel configuration not matching.



    Unfortunately, the convert channel configuration doesn't change the Synchron players from stereo versions to whatever surround version you want...
  • DietzD
    VSL Team
    DietzD

    That's true, but I think in this case it was about MIR 3D anyway (... at least that's how I understood the inquiry).

    /Dietz - Vienna Symphonic Library
  • D
    D

    I've had similar problems getting surround to work in Logic with VE Pro.  The best I've been able to do is start out in 5.1, then reselect the VE Pro AU3 in 5.1 mode.  Then convert the Logic project to 7.1. and it can sometimes convert the VE Pro to recognize that it is in 7.1.  You have to do this while still connected.  But I've never been able to get to 7.1.2 Dolby.  It just doesn't recognize that format in VE Pro AU3.  And at this point it only presents stereo types of connections if you try to reinstantiate the plugin.
  • Dewdman42D
    Dewdman42D

    That's a drag.  I tried put the VST3 version of VePro plugin inside meta plugin hoster (in 7.1.4 mode)...and that doesn't work either.

    Not exactly sure how anyone has ever been able to use VePro in surround mode?
  • D
    D

    Did you use the surround VST3 plugin?  There's a special one in VST3 for that.
  • Dewdman42D
    Dewdman42D

    yes
  • Dewdman42D
    Dewdman42D

    I'm not having any luck with Cubase so far either...admittedly I still need to learn about whether I am setting up a surround mix properly in Cubase, probably not...but the VePro Surround.VST3 will not connect to my 7.1.4 instance in VePro.
  • D
    D

    I don't have Cubase so I haven't tried this, but the VE Pro manual in the VE Pro Plugins section describes that you can set the channel configuration in the plugin instance preferences.  Does this work as shown?  This seems to be unique to the VST3 surround plugin.
  • Dewdman42D
    Dewdman42D

    oh that's new info...thanks for that.  Stay tuned.

    The option is there I see it, I selected 7.1.4 format...but it still can't connect to there 7.1.4 Vepro instance.
  • D
    D

    Try connecting to a new instance and then change the configuration using the instance preferences.
  • Dewdman42D
    Dewdman42D

    I was able to connect just now by putting VeProSurround.VST3 inside MetaPlugin (in 7.1.4 mode).  Then I was able to connect to it from that instance...but alas....this limits me to only 16 midi channels due to limitations of MetaPlugin....so its not really a useful solution right now...  But at least I was able to actually connect from SOMETHING in 7.1.4 mode to VePro in 7.1.4 mode.

    Well I don't know why it wouldn't work from cubase, but I probably have to learn more about setting up a proper surround mix in Cubase.

    LogicPro simply does not work...AU and AU3 I think are supposed to automatically detect when they are on surround channels and do the right thing, but its not working with VePro.AU or VePro.AU3

    That's all I will have time for on this, giving up for now.  If I want to do surround MirPro3D mixes I will simply not use VePro..its too complicated and doesn't seem to work very well or even at all in some cases.
  • MackerM
    MackerM
    https://forum.vsl.co.at/topic/59310/Spatialising Synchron Strings An Unorthodox Approach/312601